Frequently Asked Questions

• We are ISO 9001 certificated and have a dedicated QA team.
• We make a DFM report for your confirmation, then design the mold accordingly. We run one sample, then a small batch before mass production. For sample orders, you can usually make a 50% down payment and pay the remainder after satisfactory results.
• For key dimensions, we can make inspect fixtures to verify them.
• From material intake to final production inspection, we keep inspect reports for 3–4 years to trace quality.

We will manage problem solving, root-cause analysis, and redo the parts as needed. We often act as a buffer between the factory and customer to maintain a smooth working relationship and avoid gridlock.

Yes, we protect clients' intellectual property rigorously. Many clients sign special agreements with us and we have never faced difficulties. We are interested in long-term relationships, not one-shot deals.

We accept order quantities of around 100 pieces as a small quantity market-testing run.

Yes, we accept both OEM and ODM. We can help you design and bring your product to market.

For vacuum forming molds, usually 10–14 days. For injection molds, it typically takes about 25–35 days.

For initial samples, usually 5 days. If a mold is required, please add 20–40 days. For mass production, please allow 30 days plus 30 days for shipping.

Yes, of course. We welcome you to visit our company and discuss technical details and requirements with our team.

If you need references, please contact us at contact@yx-molding.com and we will provide a reference list upon request.

We can help with one-stop sourcing of electrical components. We also offer bonding, painting, printing, and basic assembly of electronic components and plastic products. Many customers source electrical components through our electronics division.

Please check Chapter 73 of the US Tariff Schedule. Typically, duty is free except for some specific products. For example, 3.2–5.3% for plastic parts.

In most cases, yes. There is almost always an equivalent material available in China. We can provide chemical composition reports and physical test results (tensile strength, compression strength, elongation, etc.) from third-party labs.

Our experienced team communicates in fluent English. Many of our engineers can write and understand English well and are familiar with international engineering standards.

We typically ask for 30%–40% down payment to launch production. Credit terms can be discussed later.

We need 2D part drawings and 3D drawings, plus specific mold and part requirements, or samples for precision and clarity about your product.

Normally, molds are finished in 2–5 weeks, depending on mold structure and size.

Normally up to 3 days. We need to understand your requirements and critical dimensions.

We aim to provide products as precise as possible. However, due to uncontrollable factors, mold tolerance is 0.005 mm and product tolerance is 0.02 mm (affected by shrinkage ratio).

We provide our best service throughout. If any products have quality issues, we will replace them at our expense. We establish clear quality inspection criteria at the project start. We also use a CRM system to track work history with all customers and follow up on your overall experience with us.